Zinc Plated UNC Coarse Thread Flat Countersunk Head Elevator Bolts

Just fill in the form below, click submit, you will get the price list, and we will contact you within one working day. Please also feel free to contact us via email or phone. (* is required).

  • Elevator Bolts, Flat Countersunk Head, Zinc Plated

    Elevator Bolts, Flat Countersunk Head, Zinc Plated The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order. If the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your status as an approved ...

    Get Price
  • Elevator Bolt, Flat Countersunk Head, Zinc

    Elevator Bolt, Flat Countersunk Head, Zinc This product standard contains the required dimensional, mechanical, performance, and chemical characteristics of the products shown in this purchase order (as applicable to the product). Unless specified below, current revisions of national or international standards

    Get Price
  • 1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat

    1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat Head Elevator Bolt 1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat Head Elevator Bolt 237.14.34 MFG #: F110046

    Get Price
  • Sleeve Anchor - Countersunk Head Zinc Plated

    Socket Cap Screw, Imperial, ANSI/ASME B18.3 2003, Flat Head Countersunk, UNC, UNF, Bare Steel

    Get Price
  • Flat Head Countersunk Socket Cap Screw UNC/UNF -

    Hex Bolts - UNC Coarse. Hex Set Screws - UNC Coarse. Hex Bolts - Coarse Thread. Hex Bolts - UNF Fine. Hex Set Screws - UNF Fine. Hex Bolts - Fine Thread. Hex Coach Screw - Lag Bolts…

    Get Price
  • Zinc Plated 9/16' UNF Imperial Fine Hex Head Bolt

    belt bolts, Norway bolts, No. 1 Norway elevator bolts, elevator screws, flat countersunk head elevator bolts. Since the head is designed not to turn, they are usually tightened by torquing a nut. As a leveling leg, though, they can be used with an internally threaded (tapped) hole and tightened by turning the bolt's …

    Get Price
  • Zinc Plated M20 (20mm) Metric Coarse Hex Head Bolt

    Flat and oval head screws are angled under the head to fit in countersunk holes. Shoulder Screws A cylindrical shoulder under the head allows parts to rotate around and slide along its length, so these screws are often used to guide and align components.

    Get Price
  • Elevator Bolts - Fastener Mart

    2021-4-22 · Socket shoulder screw with a UNC imperial coarse thread. They are also known as shoulder bolts, precision shoulder screw and in the US, stripper bolts. The main dimensions are for the diameter and total length required under the head. Shoulder screws have an undercut portion between the thread and shoulder, allowing a close fit.

    Get Price
  • Elevator Bolts, Flat Countersunk Head, Zinc Plated

    Elevator Bolts, Flat Countersunk Head, Zinc Plated The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order. If the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your status as an approved ...

    Get Price
  • 1/4'-20 x 1' Zinc Plated Steel Coarse Thread Flat

    1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat Head Elevator Bolt 1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat Head Elevator Bolt 237.14.34 MFG #: F110046

    Get Price
  • 1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat

    Plain Finish, or bare metal finish which may contain a light coating of oil. Elevator Bolts have a square neck which resists turning when the nut is tightened or removed, and a large head which provides a greater bearing surface for soft materials. Used often in conveyor systems. Zinc plating, retards the corrosion rate in a normal atmosphere.

    Get Price
  • 1/4'-20 x 1-1/2' Grade A Zinc Finish Flat Countersunk

    Looking for Machine screw flat countersunk UNC asme B18.6.3 ASME B18.6.3 Steel Zinc plated? Fabory offers the best buy of Machine screws Delivery within 48 …

    Get Price
  • Machine screw flat countersunk UNC asme B18.6.3

    Socket Cap Screw, Imperial, ANSI/ASME B18.3 2003, Flat Head Countersunk, UNC, UNF, Bare Steel

    Get Price
  • Sleeve Anchor - Countersunk Head Zinc Plated

    Flat and oval head screws are angled under the head to fit in countersunk holes. Shoulder Screws A cylindrical shoulder under the head allows parts to rotate around and slide along its length, so these screws are often used to guide and align components.

    Get Price
  • Flat Head Countersunk Socket Cap Screw UNC/UNF -

    2021-4-22 · Socket shoulder screw with a UNC imperial coarse thread. They are also known as shoulder bolts, precision shoulder screw and in the US, stripper bolts. The main dimensions are for the diameter and total length required under the head. Shoulder screws have an undercut portion between the thread and shoulder, allowing a close fit.

    Get Price
  • Countersunk Bolts | McMaster-Carr

    The thicker, domed head on these bolts provides greater wear resistance than flat head plow bolts. The underside of the head is angled to sit flush within countersunk holes for use on heavy equipment, such as plows. The square neck keeps these bolts from turning when tightening a nut.

    Get Price
  • Elevator Bolts, Flat Countersunk Head, Zinc Plated

    Elevator Bolts, Flat Countersunk Head, Zinc Plated The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order. If the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your status as an approved ...

    Get Price
  • 1/4'-20 x 1' Zinc Plated Steel Coarse Thread Flat

    1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat Head Elevator Bolt 1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat Head Elevator Bolt 237.14.34 MFG #: F110046

    Get Price
  • 1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat

    Plain Finish, or bare metal finish which may contain a light coating of oil. Elevator Bolts have a square neck which resists turning when the nut is tightened or removed, and a large head which provides a greater bearing surface for soft materials. Used often in conveyor systems. Zinc plating, retards the corrosion rate in a normal atmosphere.

    Get Price
  • 1/4'-20 x 1-1/2' Grade A Zinc Finish Flat Countersunk

    Looking for Machine screw flat countersunk UNC asme B18.6.3 ASME B18.6.3 Steel Zinc plated? Fabory offers the best buy of Machine screws Delivery within 48 …

    Get Price
  • Machine screw flat countersunk UNC asme B18.6.3

    Socket Cap Screw, Imperial, ANSI/ASME B18.3 2003, Flat Head Countersunk, UNC, UNF, Bare Steel

    Get Price
  • Sleeve Anchor - Countersunk Head Zinc Plated

    Flat and oval head screws are angled under the head to fit in countersunk holes. Shoulder Screws A cylindrical shoulder under the head allows parts to rotate around and slide along its length, so these screws are often used to guide and align components.

    Get Price
  • Flat Head Countersunk Socket Cap Screw UNC/UNF -

    2021-4-22 · Socket shoulder screw with a UNC imperial coarse thread. They are also known as shoulder bolts, precision shoulder screw and in the US, stripper bolts. The main dimensions are for the diameter and total length required under the head. Shoulder screws have an undercut portion between the thread and shoulder, allowing a close fit.

    Get Price
  • Countersunk Bolts | McMaster-Carr

    The thicker, domed head on these bolts provides greater wear resistance than flat head plow bolts. The underside of the head is angled to sit flush within countersunk holes for use on heavy equipment, such as plows. The square neck keeps these bolts from turning when tightening a nut.

    Get Price
  • Elevator Bolts, Flat Countersunk Head, Zinc Plated

    Elevator Bolts, Flat Countersunk Head, Zinc Plated The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order. If the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your status as an approved ...

    Get Price
  • Elevator Bolt, Flat Countersunk Head, Zinc

    Elevator Bolt, Flat Countersunk Head, Zinc This product standard contains the required dimensional, mechanical, performance, and chemical characteristics of the products shown in this purchase order (as applicable to the product). Unless specified below, current revisions of national or international standards

    Get Price
  • 1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat

    1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat Head Elevator Bolt 1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat Head Elevator Bolt 237.14.34 MFG #: F110046

    Get Price
  • Sleeve Anchor - Countersunk Head Zinc Plated

    Socket Cap Screw, Imperial, ANSI/ASME B18.3 2003, Flat Head Countersunk, UNC, UNF, Bare Steel

    Get Price
  • Flat Head Countersunk Socket Cap Screw UNC/UNF -

    Hex Bolts - UNC Coarse. Hex Set Screws - UNC Coarse. Hex Bolts - Coarse Thread. Hex Bolts - UNF Fine. Hex Set Screws - UNF Fine. Hex Bolts - Fine Thread. Hex Coach Screw - Lag Bolts…

    Get Price
  • Zinc Plated 9/16' UNF Imperial Fine Hex Head Bolt

    belt bolts, Norway bolts, No. 1 Norway elevator bolts, elevator screws, flat countersunk head elevator bolts. Since the head is designed not to turn, they are usually tightened by torquing a nut. As a leveling leg, though, they can be used with an internally threaded (tapped) hole and tightened by turning the bolt's …

    Get Price
  • Zinc Plated M20 (20mm) Metric Coarse Hex Head Bolt

    Flat and oval head screws are angled under the head to fit in countersunk holes. Shoulder Screws A cylindrical shoulder under the head allows parts to rotate around and slide along its length, so these screws are often used to guide and align components.

    Get Price
  • Elevator Bolts - Fastener Mart

    2021-4-22 · Socket shoulder screw with a UNC imperial coarse thread. They are also known as shoulder bolts, precision shoulder screw and in the US, stripper bolts. The main dimensions are for the diameter and total length required under the head. Shoulder screws have an undercut portion between the thread and shoulder, allowing a close fit.

    Get Price
  • Elevator Bolts, Flat Countersunk Head, Zinc Plated

    Elevator Bolts, Flat Countersunk Head, Zinc Plated The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order. If the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your status as an approved ...

    Get Price
  • Elevator Bolt, Flat Countersunk Head, Zinc

    Elevator Bolt, Flat Countersunk Head, Zinc This product standard contains the required dimensional, mechanical, performance, and chemical characteristics of the products shown in this purchase order (as applicable to the product). Unless specified below, current revisions of national or international standards

    Get Price
  • 1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat

    1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat Head Elevator Bolt 1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat Head Elevator Bolt 237.14.34 MFG #: F110046

    Get Price
  • Sleeve Anchor - Countersunk Head Zinc Plated

    Socket Cap Screw, Imperial, ANSI/ASME B18.3 2003, Flat Head Countersunk, UNC, UNF, Bare Steel

    Get Price
  • Flat Head Countersunk Socket Cap Screw UNC/UNF -

    Hex Bolts - UNC Coarse. Hex Set Screws - UNC Coarse. Hex Bolts - Coarse Thread. Hex Bolts - UNF Fine. Hex Set Screws - UNF Fine. Hex Bolts - Fine Thread. Hex Coach Screw - Lag Bolts…

    Get Price
  • Zinc Plated 9/16' UNF Imperial Fine Hex Head Bolt

    belt bolts, Norway bolts, No. 1 Norway elevator bolts, elevator screws, flat countersunk head elevator bolts. Since the head is designed not to turn, they are usually tightened by torquing a nut. As a leveling leg, though, they can be used with an internally threaded (tapped) hole and tightened by turning the bolt's …

    Get Price
  • Zinc Plated M20 (20mm) Metric Coarse Hex Head Bolt

    Flat and oval head screws are angled under the head to fit in countersunk holes. Shoulder Screws A cylindrical shoulder under the head allows parts to rotate around and slide along its length, so these screws are often used to guide and align components.

    Get Price
  • Elevator Bolts - Fastener Mart

    2021-4-22 · Socket shoulder screw with a UNC imperial coarse thread. They are also known as shoulder bolts, precision shoulder screw and in the US, stripper bolts. The main dimensions are for the diameter and total length required under the head. Shoulder screws have an undercut portion between the thread and shoulder, allowing a close fit.

    Get Price
  • Elevator Bolts, Flat Countersunk Head, Zinc Plated

    Elevator Bolts, Flat Countersunk Head, Zinc Plated The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order. If the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your status as an approved ...

    Get Price
  • Elevator Bolt, Flat Countersunk Head, Zinc

    Elevator Bolt, Flat Countersunk Head, Zinc This product standard contains the required dimensional, mechanical, performance, and chemical characteristics of the products shown in this purchase order (as applicable to the product). Unless specified below, current revisions of national or international standards

    Get Price
  • 1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat

    1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat Head Elevator Bolt 1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat Head Elevator Bolt 237.14.34 MFG #: F110046

    Get Price
  • Sleeve Anchor - Countersunk Head Zinc Plated

    Socket Cap Screw, Imperial, ANSI/ASME B18.3 2003, Flat Head Countersunk, UNC, UNF, Bare Steel

    Get Price
  • Flat Head Countersunk Socket Cap Screw UNC/UNF -

    Hex Bolts - UNC Coarse. Hex Set Screws - UNC Coarse. Hex Bolts - Coarse Thread. Hex Bolts - UNF Fine. Hex Set Screws - UNF Fine. Hex Bolts - Fine Thread. Hex Coach Screw - Lag Bolts…

    Get Price
  • Zinc Plated 9/16' UNF Imperial Fine Hex Head Bolt

    belt bolts, Norway bolts, No. 1 Norway elevator bolts, elevator screws, flat countersunk head elevator bolts. Since the head is designed not to turn, they are usually tightened by torquing a nut. As a leveling leg, though, they can be used with an internally threaded (tapped) hole and tightened by turning the bolt's …

    Get Price
  • Zinc Plated M20 (20mm) Metric Coarse Hex Head Bolt

    Flat and oval head screws are angled under the head to fit in countersunk holes. Shoulder Screws A cylindrical shoulder under the head allows parts to rotate around and slide along its length, so these screws are often used to guide and align components.

    Get Price
  • Elevator Bolts - Fastener Mart

    2021-4-22 · Socket shoulder screw with a UNC imperial coarse thread. They are also known as shoulder bolts, precision shoulder screw and in the US, stripper bolts. The main dimensions are for the diameter and total length required under the head. Shoulder screws have an undercut portion between the thread and shoulder, allowing a close fit.

    Get Price
  • Elevator Bolts, Flat Countersunk Head, Zinc Plated

    Elevator Bolts, Flat Countersunk Head, Zinc Plated The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order. If the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your status as an approved ...

    Get Price
  • Elevator Bolt, Flat Countersunk Head, Zinc

    Elevator Bolt, Flat Countersunk Head, Zinc This product standard contains the required dimensional, mechanical, performance, and chemical characteristics of the products shown in this purchase order (as applicable to the product). Unless specified below, current revisions of national or international standards

    Get Price
  • 1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat

    1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat Head Elevator Bolt 1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat Head Elevator Bolt 237.14.34 MFG #: F110046

    Get Price
  • Sleeve Anchor - Countersunk Head Zinc Plated

    Socket Cap Screw, Imperial, ANSI/ASME B18.3 2003, Flat Head Countersunk, UNC, UNF, Bare Steel

    Get Price
  • Flat Head Countersunk Socket Cap Screw UNC/UNF -

    Hex Bolts - UNC Coarse. Hex Set Screws - UNC Coarse. Hex Bolts - Coarse Thread. Hex Bolts - UNF Fine. Hex Set Screws - UNF Fine. Hex Bolts - Fine Thread. Hex Coach Screw - Lag Bolts…

    Get Price
  • Zinc Plated 9/16' UNF Imperial Fine Hex Head Bolt

    belt bolts, Norway bolts, No. 1 Norway elevator bolts, elevator screws, flat countersunk head elevator bolts. Since the head is designed not to turn, they are usually tightened by torquing a nut. As a leveling leg, though, they can be used with an internally threaded (tapped) hole and tightened by turning the bolt's …

    Get Price
  • Zinc Plated M20 (20mm) Metric Coarse Hex Head Bolt

    Flat and oval head screws are angled under the head to fit in countersunk holes. Shoulder Screws A cylindrical shoulder under the head allows parts to rotate around and slide along its length, so these screws are often used to guide and align components.

    Get Price
  • Elevator Bolts - Fastener Mart

    2021-4-22 · Socket shoulder screw with a UNC imperial coarse thread. They are also known as shoulder bolts, precision shoulder screw and in the US, stripper bolts. The main dimensions are for the diameter and total length required under the head. Shoulder screws have an undercut portion between the thread and shoulder, allowing a close fit.

    Get Price
  • Elevator Bolts, Flat Countersunk Head, Zinc Plated

    Elevator Bolts, Flat Countersunk Head, Zinc Plated The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order. If the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your status as an approved ...

    Get Price
  • Elevator Bolt, Flat Countersunk Head, Zinc

    Elevator Bolt, Flat Countersunk Head, Zinc This product standard contains the required dimensional, mechanical, performance, and chemical characteristics of the products shown in this purchase order (as applicable to the product). Unless specified below, current revisions of national or international standards

    Get Price
  • 1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat

    1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat Head Elevator Bolt 1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat Head Elevator Bolt 237.14.34 MFG #: F110046

    Get Price
  • Sleeve Anchor - Countersunk Head Zinc Plated

    Socket Cap Screw, Imperial, ANSI/ASME B18.3 2003, Flat Head Countersunk, UNC, UNF, Bare Steel

    Get Price
  • Flat Head Countersunk Socket Cap Screw UNC/UNF -

    Hex Bolts - UNC Coarse. Hex Set Screws - UNC Coarse. Hex Bolts - Coarse Thread. Hex Bolts - UNF Fine. Hex Set Screws - UNF Fine. Hex Bolts - Fine Thread. Hex Coach Screw - Lag Bolts…

    Get Price
  • Zinc Plated 9/16' UNF Imperial Fine Hex Head Bolt

    belt bolts, Norway bolts, No. 1 Norway elevator bolts, elevator screws, flat countersunk head elevator bolts. Since the head is designed not to turn, they are usually tightened by torquing a nut. As a leveling leg, though, they can be used with an internally threaded (tapped) hole and tightened by turning the bolt's …

    Get Price
  • Zinc Plated M20 (20mm) Metric Coarse Hex Head Bolt

    Flat and oval head screws are angled under the head to fit in countersunk holes. Shoulder Screws A cylindrical shoulder under the head allows parts to rotate around and slide along its length, so these screws are often used to guide and align components.

    Get Price
  • Elevator Bolts - Fastener Mart

    2021-4-22 · Socket shoulder screw with a UNC imperial coarse thread. They are also known as shoulder bolts, precision shoulder screw and in the US, stripper bolts. The main dimensions are for the diameter and total length required under the head. Shoulder screws have an undercut portion between the thread and shoulder, allowing a close fit.

    Get Price
  • Elevator Bolts, Flat Countersunk Head, Zinc Plated

    Elevator Bolts, Flat Countersunk Head, Zinc Plated The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order. If the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your status as an approved ...

    Get Price
  • Elevator Bolt, Flat Countersunk Head, Zinc

    Elevator Bolt, Flat Countersunk Head, Zinc This product standard contains the required dimensional, mechanical, performance, and chemical characteristics of the products shown in this purchase order (as applicable to the product). Unless specified below, current revisions of national or international standards

    Get Price
  • 1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat

    1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat Head Elevator Bolt 1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat Head Elevator Bolt 237.14.34 MFG #: F110046

    Get Price
  • Sleeve Anchor - Countersunk Head Zinc Plated

    Socket Cap Screw, Imperial, ANSI/ASME B18.3 2003, Flat Head Countersunk, UNC, UNF, Bare Steel

    Get Price
  • Flat Head Countersunk Socket Cap Screw UNC/UNF -

    Hex Bolts - UNC Coarse. Hex Set Screws - UNC Coarse. Hex Bolts - Coarse Thread. Hex Bolts - UNF Fine. Hex Set Screws - UNF Fine. Hex Bolts - Fine Thread. Hex Coach Screw - Lag Bolts…

    Get Price
  • Zinc Plated 9/16' UNF Imperial Fine Hex Head Bolt

    belt bolts, Norway bolts, No. 1 Norway elevator bolts, elevator screws, flat countersunk head elevator bolts. Since the head is designed not to turn, they are usually tightened by torquing a nut. As a leveling leg, though, they can be used with an internally threaded (tapped) hole and tightened by turning the bolt's …

    Get Price
  • Zinc Plated M20 (20mm) Metric Coarse Hex Head Bolt

    Flat and oval head screws are angled under the head to fit in countersunk holes. Shoulder Screws A cylindrical shoulder under the head allows parts to rotate around and slide along its length, so these screws are often used to guide and align components.

    Get Price
  • Elevator Bolts - Fastener Mart

    2021-4-22 · Socket shoulder screw with a UNC imperial coarse thread. They are also known as shoulder bolts, precision shoulder screw and in the US, stripper bolts. The main dimensions are for the diameter and total length required under the head. Shoulder screws have an undercut portion between the thread and shoulder, allowing a close fit.

    Get Price
  • Elevator Bolts, Flat Countersunk Head, Zinc Plated

    Elevator Bolts, Flat Countersunk Head, Zinc Plated The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order. If the order received does not meet these requirements, it may result in a supplier corrective action request, which could jeopardize your status as an approved ...

    Get Price
  • Elevator Bolt, Flat Countersunk Head, Zinc

    Elevator Bolt, Flat Countersunk Head, Zinc This product standard contains the required dimensional, mechanical, performance, and chemical characteristics of the products shown in this purchase order (as applicable to the product). Unless specified below, current revisions of national or international standards

    Get Price
  • 1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat

    1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat Head Elevator Bolt 1/4-20 x 3/4 Inch Coarse Zinc Plated Grade 2 Flat Head Elevator Bolt 237.14.34 MFG #: F110046

    Get Price
  • Sleeve Anchor - Countersunk Head Zinc Plated

    Socket Cap Screw, Imperial, ANSI/ASME B18.3 2003, Flat Head Countersunk, UNC, UNF, Bare Steel

    Get Price
  • Flat Head Countersunk Socket Cap Screw UNC/UNF -

    Hex Bolts - UNC Coarse. Hex Set Screws - UNC Coarse. Hex Bolts - Coarse Thread. Hex Bolts - UNF Fine. Hex Set Screws - UNF Fine. Hex Bolts - Fine Thread. Hex Coach Screw - Lag Bolts…

    Get Price
  • Zinc Plated 9/16' UNF Imperial Fine Hex Head Bolt

    belt bolts, Norway bolts, No. 1 Norway elevator bolts, elevator screws, flat countersunk head elevator bolts. Since the head is designed not to turn, they are usually tightened by torquing a nut. As a leveling leg, though, they can be used with an internally threaded (tapped) hole and tightened by turning the bolt's …

    Get Price
  • Zinc Plated M20 (20mm) Metric Coarse Hex Head Bolt

    Flat and oval head screws are angled under the head to fit in countersunk holes. Shoulder Screws A cylindrical shoulder under the head allows parts to rotate around and slide along its length, so these screws are often used to guide and align components.

    Get Price
  • Elevator Bolts - Fastener Mart

    2021-4-22 · Socket shoulder screw with a UNC imperial coarse thread. They are also known as shoulder bolts, precision shoulder screw and in the US, stripper bolts. The main dimensions are for the diameter and total length required under the head. Shoulder screws have an undercut portion between the thread and shoulder, allowing a close fit.

    Get Price
  • Elevator Bolt Grade 2 Steel 3/8-16 x 3' - 52147 ...

    Elevator Bolt, Flat Countersunk Head, Grade 2, Steel, Zinc Finish, Coarse Thread, UNR Thread Form, Square Neck, 3/8-16 x 3 - 52147

    Get Price
  • GRAINGER APPROVED Elevator Bolt, Elevator Bolt,

    Elevator Bolts • Tensile strength: 60,000 psi Rockwell hardness: B70 to B100 Flat, smooth, countersunk head allows minimal extrusion from the wall; square neck provides a locking feature. For use where there is little space between elevator and wall. Made of zinc-plated low-carbon steel. Meet SAE J429 Grade 1 and ASME B18.5 standards.

    Get Price
  • #6-32x5/8' (FT) UNC MACHINE SCREWS PHILIPS FLAT

    Elevator Bolts. Grade 2 Flat Countersunk Head Elevator Bolt, Plain (Inch) Grade 2 Flat Countersunk Head Elevator Bolt, Zinc (Inch) Eye Bolts. Turned Eye Bolt, Steel, Zinc (Inch) Flange Screws. Grade 5 Hex Head Serrated Flange Screw, Zinc (Inch) Grade 8 Indented Hex Flange Screw (Frame Bolt), Black Phosphate & Oil (Inch)

    Get Price
  • 5/16'-18 Steel Flat Elevator Bolt, Grade A, 3'L, Zinc ...

    Elevator Bolts are specifically designed to be used where there is little space between the elevator and the wall. The flat, smooth, countersunk head allows minimal extrusion from the wall, while the square neck provides a locking feature. Meet SAE J429 Grade 1 and ASME B18.5 standards.

    Get Price
  • FABORY B08361.025.0300 Elevator Bolt,Flat Head,3'

    Inch, Elevator Bolt, Head Type - Bolts Flat, Steel, Material Grade Grade A, Fastener Finish Zinc Plated, Dia./Thread Size 1/4 In.-20, Fastener Length 3 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse), Fastener Industry Standards ASME B18.5, Fastener Thread Style Partially Threaded, Head Dia. 0.969 in, Head Height 0.078 in, Package Quantity 600

    Get Price
  • .

    Get Price
  • J-Bolt Supplier - Bolt Nut by Windo Metal

    Zinc plated steel J-Bolts,High Strength U-bolts Nuts, Flat Countersunk Head Elevator Bolt ASTM A325 Structural Anchor J-bolts Length: 16-36” Size: 1/4”-3”, M5-M64 Material: Carbon Steel, Alloy Steel, Stainless Steel, Brass Grade: ASTM A307B, A449, F1554,cLass 4.6, 5.6, 8.8, 10.9, etc Head type:forged hex, heavy hex or square head Thread: M, UNC, UNF Finish: Plain, Zinc […]

    Get Price
  • Elevator Bolts - Fastener Mart

    belt bolts, Norway bolts, No. 1 Norway elevator bolts, elevator screws, flat countersunk head elevator bolts. Since the head is designed not to turn, they are usually tightened by torquing a nut. As a leveling leg, though, they can be used with an internally threaded (tapped) hole and tightened by turning the bolt's …

    Get Price
  • Countersunk Bolts | McMaster-Carr

    Flat and oval head screws are angled under the head to fit in countersunk holes. Shoulder Screws A cylindrical shoulder under the head allows parts to rotate around and slide along its length, so these screws are often used to guide and align components.

    Get Price
  • Fastenerdata - Silver Plated Bolts 16f30 - Fastener ...

    Fasteners Silver Plate have outstanding corrosion resistance to a broad range of chemicals, and Exceptional anti-galling and anti-fretting due to its low friction and higher lubricity, Silver plated fasteners have outstanding conductivity and excellent solderability. Silver does not degrade and is effective at high temperatures. and Silver is oxidation resistant; silver is perfect for use in ...

    Get Price
  • German Standard Fastener, Coated, Plated, DIN

    2021-4-8 · DIN 933: Hexagon head bolts with thread up to head DIN 934: Hexagon nuts with metric coarse and fine pitch thread DIN 935: Hexagon slotted castle nuts DIN 936: Hex nuts, low type DIN 937: Castle nuts, low form DIN 938: Studs with engagement length 1 x d DIN 939: Studs, with engagement length 1.25 x d DIN 94: Split pins

    Get Price
  • 5/16'-18x2', (FT) Grade 2 Flat COUNTERSUNK Head

    5/16'-18x2', (FT) Grade 2 Flat COUNTERSUNK Head Elevator Bolt, ZINC CR+3 (INCH) (Quantity 50): Amazon.com: Industrial & Scientific

    Get Price
  • 5/16'-18 Steel Flat Elevator Bolt, Grade A, 3'L, Zinc ...

    Elevator Bolts are specifically designed to be used where there is little space between the elevator and the wall. The flat, smooth, countersunk head allows minimal extrusion from the wall, while the square neck provides a locking feature. Meet SAE J429 Grade 1 and ASME B18.5 standards.

    Get Price
  • FABORY B08361.025.0300 Elevator Bolt,Flat Head,3'

    Inch, Elevator Bolt, Head Type - Bolts Flat, Steel, Material Grade Grade A, Fastener Finish Zinc Plated, Dia./Thread Size 1/4 In.-20, Fastener Length 3 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse), Fastener Industry Standards ASME B18.5, Fastener Thread Style Partially Threaded, Head Dia. 0.969 in, Head Height 0.078 in, Package Quantity 600

    Get Price
  • .

    Get Price
  • 1-1/8-7X5 Cap screw Hex Head 8 Steel Yellow Zinc UNC

    FAST FREE SHIPPING on 1-1/8'-7 X 5', Cap Screws, Hex Head, UNC Coarse Thread, Grade 8 Steel, Yellow Zinc, Made in U.S.A. - Buy online or call 1-800-479-0056, Part Number: BO020-1187X5-000020 Quantity: 20, Price USD: 332.02, Weight lbs: 33.8

    Get Price
  • 140 SOCKET SCREW KEYS Series CLES DE VIS CREUX

    2020-1-23 · UNC Coarse Thread These flat countersunk head square neck Elevator Bolts have large diameter flush heads. Used on elevator buckets and industrial belting where low head clearance is needed. Also used extensively in truck and trailer applications for walls, floors, racks and trailer doors. Order by Stock Number Standard Package Contains 100 ...

    Get Price
  • Socket flat head, Alloy steel black oxide finish - Bolt

    Socket flat head. Stainless steel 18-8; Stainless steel 18-8 black oxide finish; Stainless steel 316; Chrome plated steel; Zinc plated alloy steel; Alloy steel black oxide finish. Coarse (standard) thread; Fine thread; Socket button head; Set screws; Nuts; Washers; Studs, Rod & Stock; Hanger bolts & Dowel screws; Anchoring products; Eye bolts ...

    Get Price
  • Polish Standard Fastener, Coated, Plated, PN Standard ...

    2021-4-9 · PN 82342: Hexagon fits bolts with long thread PN 82343: High-strength injection structural bolts PN 82402: Flat countersunk square neck bolts with hexagon nut PN 82406: Mushroom head square neck bolts PN 82408: Flat countersunk nib bolts with hexagon nut PN 82410: Half coach Bolts PN 82416: Welding studs PN 82418: T-Head bolts with square neck Head

    Get Price
  • Fastener((Manufacturers| Suppliers| Exporters|

    2021-4-23 · Various types of rivets that we can offer are semi-tubular rivet, brake lining rivet, clutch facing rivet, countersunk, disc brake lining rivet, flat head, oval head, truss head, solid/round head rivet, high-strength structural steel rivet, flat/nail head tinners rivet, 78° countersunk, 90° countersunk, 100° countersunk, pan head, modified ...

    Get Price
  • BOLTS - Fastener Mart

    A countersunk recess (a beveled opening) is used with countersunk styles, like flat head stove bolts. Other types may be installed in a counterbored (flat bottom) recess, such as shoulder bolts. See the specific bolt type for more information.

    Get Price
  • Fastenerdata - FASTENER COATINGS knc - Fastener

    Fasteners are electroplated coated or sprayed for better corrosion resistance. Zinc is the prime material for electroplated coating fasteners, zinc alloys are also electro-plated; zinc-nickel and zinc-iron. Zinc plating applies a thin coating of zinc to fasteners, giving them a layer of protection from the surrounding environment. This zinc electroplating provides a coating that works as an ...

    Get Price
  • FABORY B08361.037.0300 Elevator Bolt,Flat Head,3'

    Inch, Elevator Bolt, Head Type - Bolts Flat, Steel, Material Grade Grade A, Fastener Finish Zinc Plated, Dia./Thread Size 3/8 In.-16, Fastener Length 3 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse), Fastener Industry Standards ASME B18.5, Fastener Thread Style Partially Threaded, Head Dia. 1.312 in, Head Height 0.125 in, Package Quantity 230

    Get Price
  • .

    Get Price
  • FABORY B08361.025.0300 Elevator Bolt,Flat Head,3'

    Inch, Elevator Bolt, Head Type - Bolts Flat, Steel, Material Grade Grade A, Fastener Finish Zinc Plated, Dia./Thread Size 1/4 In.-20, Fastener Length 3 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse), Fastener Industry Standards ASME B18.5, Fastener Thread Style Partially Threaded, Head Dia. 0.969 in, Head Height 0.078 in, Package Quantity 600

    Get Price
  • .

    Get Price
  • Ram Products. Elevator Bolts

    Bolt with a wide, countersunk flat head. Shallow conical bearing surface. Square neck under the head is designed to keep the bolt from turning as the nut is tightened. Zinc plated. Tensile strength: 54,000 psi minimum. Unified screw threads: UNC. Diameter: 1/4'-20. Length: 1-1/2'.

    Get Price
  • Elevator Bolt Duplex Steel UNS S31803, S32550,

    2020-4-25 · Elevator bolts have a 'large circular head with a flat top surface and a shallow conical bearing surface, and an integrally formed square neck under the head.' Elevator bolts are also known as: belt bolts, Norway bolts, No. 1 Norway elevator bolts, elevator screws, flat countersunk head elevator bolts.

    Get Price
  • Hard-to-Find Fastener 014973239794 Elevator Bolts,

    Buy Hard-to-Find Fastener 014973239794 Elevator Bolts, 3/8-16 x 3, Piece-5: Elevator Bolts - Amazon.com FREE DELIVERY possible on eligible purchases

    Get Price
  • 140 SOCKET SCREW KEYS Series CLES DE VIS CREUX

    2020-1-23 · UNC Coarse Thread These flat countersunk head square neck Elevator Bolts have large diameter flush heads. Used on elevator buckets and industrial belting where low head clearance is needed. Also used extensively in truck and trailer applications for walls, floors, racks and trailer doors. Order by Stock Number Standard Package Contains 100 ...

    Get Price
  • Hex bolts, Zinc plated grade 5 steel, 3/8'-16 - Bolt

    Hex bolt length is measured from under the head to the end of the bolt. Note: Thread length on bolts can vary. Some shorter lengths will be fully threaded. ... SAE flat washers, Zinc plated grade 5 steel, 3/8' ... Tap bolts, Zinc plated grade 5 steel, 3/8'-16. A full thread bolt with a six sided head.

    Get Price
  • Heavy Hex Bolts, A307 Grade B, Zinc (inch) | AALL

    Grade B, A307 heavy hex bolts are externally threaded fasteners made of carbon steel. Bolts designated as heavy hex bolts are very similar to standard hex bolts however the head size across the flats and across the corners is larger providing a broader bearing surface.

    Get Price
  • Coated Fasteners Manufacturer - Ananka Fasteners

    Ananka Fasteners is the best leading Coated Fasteners Manufacturer in India. We have a wide range of Washers, with ready stock for export and supply. We take orders and manufacture as per the customers’ requirements. Ananka Fasteners has a life expectancy years beyond the competition in highly corrosive offshore, energy industrial environments, NanoGalv Fasteners out-perform all currently ...

    Get Price
  • Bolt Manufacturer in India - Ananka Fasteners

    Bolt Manufacturer, Bolt Stockist, Bolt Supplier, Bolt Exporter in India- Ananka Fasteners. Ananka Fasteners is the best leading high-quality Bolt Manufacturer in India.We have a wide range of Bolt, with ready stock for export and supply.We take orders and manufacture as per the customers’ requirements.

    Get Price
  • Hex bolts, Zinc plated grade 5 steel, 3/8'-16 - Bolt

    Hex bolt length is measured from under the head to the end of the bolt. Note: Thread length on bolts can vary. Some shorter lengths will be fully threaded. ... SAE flat washers, Zinc plated grade 5 steel, 3/8' ... Tap bolts, Zinc plated grade 5 steel, 3/8'-16. A full thread bolt with a six sided head.

    Get Price
  • Screws and Bolts – American Fasteners Corp.

    FLAT HEAD CAP SCREW This fastener is a quality, close tolerance product with dimensions conforming to USASI B18.6.2. Made of Grade 2 steel, it provides a tensile strength of 74,000 psi. The flat countersunk head has an accurately milled slot for holding or tightening with screwdriver. Available from stock in diameters from 1/2 through 3/4

    Get Price
  • Ram Products. All Thread Rod

    All thread rods, grade A zinc plated. UNC coarse thread. Carbon steel material, heat treated. Includes 5 each of 1/4'20 through 1/2'-13. Includes 3 each of 5/8'-11 & 3/4'-10. In a rod rack. 31 pieces.

    Get Price
  • Elevator Bucket Bolt Manufacturer In India | Grain Lift ...

    2021-1-23 · Metric Coarse Elevator Bucket Bolt Grade-5.8 DIN15237: United Arab Emirates (UAE), Oman Metric Coarse Elevator Bucket Bolt Stainless-Steel 18/10-316-A4 DIN15237: Iran, Mexico Metric Coarse Elevator Bucket Bolt REF70 Steel: Doha, Qatar, Singapore Din15237 Belt Screw Fanged Elevator Bolt And Nut For Bucket Elevator: South Korea, Taiwan

    Get Price
  • Heavy Hex Bolts, A307 Grade B, Zinc (inch) | AALL

    Grade B, A307 heavy hex bolts are externally threaded fasteners made of carbon steel. Bolts designated as heavy hex bolts are very similar to standard hex bolts however the head size across the flats and across the corners is larger providing a broader bearing surface.

    Get Price
  • Common Fastener Related Terminology | Coastal

    2021-3-18 · A countersunk head that has been cut off at 70% of the normal height. Screws in this style will have a second flat surface parallel to the top just before the threads. Used frequently in extremely short screws to provide more thread.

    Get Price
  • Products, FastenFinder 18FS010C037 Flat Socket Cap

    Flat Socket Cap Screws are unique in that their drive is made for use with an Allen wrench. A lot of goods such as furniture come with a kit of fasteners used to assemlbe the item, including socket head cap screws and an Allen wrench. Flack socket cap screws have a flat head which can be countersunk below the material's surface.

    Get Price
  • Hobson Engineering Co PtyChengli

    Australia's leading supplier of quality fasteners, bolts, nuts, allthread rod, screws and anchors to the mining, construction, oil and manufacturing industries.

    Get Price
  • Visit Fabory and purchase Plow bolts and other

    Plow bolts for less at Fabory store, Excellent finish, long life, Manufactured in high tensile carbon steel, SAE J429 /ASME B18.9 compliance text.skipToContent text.skipToNavigation +31 (0)88 2253000

    Get Price
  • Phosphorous Bronze Fasteners| UNS

    2021-4-20 · ISO approved manufacturer of Phosphorous Bronze Fasteners, Supplier of UNS C51000/C51900/C52100 Nuts And Bolts, many sizes available in Astm C54400 wood screws & threaded rod at best price in India.

    Get Price